Lead Rubber Jacket

Specification:
International new-style protective materials
Lead-free new-style protective materials
Fine manufacture, soft and comfortable
Front: 0.35mmPb or 0.50mmPb
Back and sleeve:0.25mmPb
S: 900*550mm
M: 1000*600mm
L: 1100*600mm
Color: grey, light green, sky blue, dark blue, dark green, magenta etc
The medical X-ray protective rubber jacket, " protective rubber jacket " for short are made from crude rubber and litharge lead oxide yellow. They are processed and packed with wrapping cloth.
The protective rubber jacket are mainly used for the protection from X-ray.
The customers can choose the protective rubber jacket of different specifications according to their needs.
It is applicable to the protection from X-ray in the medical treatment organizations.
Before operation, the operator should check the surface packing cloth( inner and outer) of the protective rubber jacket whether it is firm or not, check whether the connection of the fittings is firm,check whether the attenuation equivalent on the mark is suitable to the operator. After the examination, put on the protective rubber jacket on your body. Then start the operation.
Attention:
1.After the operation, lay the protective rubber jacket flat or hang them up by coat hangers to avoid breach caused by a long-time fold and avoid radial leak.
2.If the surface of the rubber jacket is dirty, firstly scrub away by banister brush with liquid of lower density or a little amount of washing powder, then wash with clean water and directly airing it at a well ventilated place.
3. When storing the protective rubber jacket, put them in the well airy room where untouched the sun shine and far away from the heat source. Must not touch with the acid or alkali chemical products to ensure the service life of them.
4.According to the standard of GB16757-1997, the service life of the protective rubber jacket is 4-5 years. The user should have a regular examination to them. The examination method is to fondle or bend the clothing by hand and check it by eyes. If the crackle of the product exceeds one third of it, the product can not be used any more, must be discarded or renewed.